Hello to all,

Since a few day I'm a proud owner of a Spykee!

Of course I wanted to make a few mods and many post are referring to www.spykeemods.co.uk which is unfortunately down.

Any suggestion on how to get hold of detailed information about the head tilt mod?

Many thanks in advance for any hint.

Regards,

Dirk

Hi Deekee,

I have carried out the head mod and can show you some pictures and send you the Arduino program if you like? You'll need to get hold of an Arduino card and a small general purpose servo. A couple of servo leads are useful as it enables you to connect to the pins on the board without soldering. Connections to the robot are via the power switch circuit board and you need to connect to the led controller that supplies the LEDs in the robot base. I'll see if I still have the circuit diagram saved somewhere. I also carried out an additional mod to disable the Arduino when docked. I used a reed switch and magnet in the dock to effect this. I can give you some instructions on this too if you like. Let me know if you're still interested.

Regards,

Nat.

Hi Nat,

Hope you still check this forum. I have been looking for the Arduino program. I have already got the card but I can't find the program and/or the wiring for circut or any diagram. By any chance would you be able to either share that prgram with me or point me to the right direction? Thanks

Regards

Ageen